北京pk10滚雪球在线计划

Build standard library

national standards of People's Republic of China

Specification for engineering installation and quality acceptance of yarn-dyed equipment

Code for installation and quality acceptance of yarn-dyed woven equipment engineering

GB / T 51090-2015

Compiling department: China Textile Industry Federation Approving department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Effective date: October 1, 2015

Announcement No. 730 of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

Announcement of the Ministry of Housing and Urban-Rural Development on the release of the national standard "Code for the Installation and Quality Acceptance of Yarn-dyed Equipment Engineering"

The "Code for the Installation and Quality Acceptance of Yarn-dyed Equipment Engineering" is now approved as the national standard, numbered GB / T 51090-2015, and will be implemented as of October 1, 2015.
This specification is published by the China Planning Publishing House organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
February 2, 2015

Foreword

This code is based on the requirements of the Ministry of Housing and Urban-Rural Development's "Notice on Printing and Distributing the" 2013 Construction and Construction Standard Specification Development and Revision Plan "" (Jianbiao [2013] No. 6). Prepared.
During the preparation of this specification, the compilation team summarized the installation and operation experience of China's yarn-dyed equipment based on the development status and equipment characteristics of China's yarn-dyed industry, and extensively solicited opinions from relevant units and experts and scholars throughout the country. After repeated discussions and amendments, Final review and finalization.
This specification is divided into 8 chapters. The main contents include general rules, terms, basic provisions, installation of main equipment for dyeing of bobbins and warp beams, installation of main equipment for dyeing of denim yarn, installation of main equipment for weaving, electrical equipment and control systems. Requirements, commissioning and acceptance of equipment.
This specification is managed by the Ministry of Housing and Urban-Rural Development, China Textile Industry Federation is responsible for daily management, and Hengtian Heavy Industry Co., Ltd. is responsible for the interpretation of specific technical content. During the implementation of this code, if you find that you need to modify and supplement, please send your comments or suggestions to Hengtian Heavy Industry Co., Ltd. (Address: No. 258 Wutong Street, High-tech Zone, Zhengzhou City, Henan Province, Post Code: 450012, E-mail : Pdm6471@163.com) for future reference.
The chief editing unit, participating editing unit, main drafter and main reviewer of this code:
Compiling institutes : China Textile Industry Federation
Hengtian Heavy Industry Co., Ltd.
Participating organization : Lutai Textile Co., Ltd.
Lixin Dyeing and Finishing Machinery (Shenzhen) Co., Ltd.
Shaoyang Textile Machinery Co., Ltd.
China Textile Machinery Equipment Industry Association
The main drafters : Wu Guohong, Geng Caihua, Cui Yunxi, Liu Shuyun, Lin Daming, Wang Zhishan, Lin Jian, Qiu Denghui, Sun Liangyuan, Li Xueqing, Li Zhikuan, Chen Pengfei, Ye Junfang
Main reviewers : Zhang Shiping, Huang Hongkang, Wang Lixin, Wu Yuhua, along with the Red Army, Lu Shiyan, Jiang Maoqi, Feng Xueliang, Luo Jun, Lu Jiaosheng, Sun Xiaoling, and Ma Lina