北京pk10滚雪球在线计划

Build standard library

People's Republic of China Industry Standards

Building curtain wall engineering test method standard

Standard for test method of building curtain wall engineering

JGJ / T 324-2014

Approval department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Effective date: October 1, 2014

Announcement No. 330 of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

Announcement of the Ministry of Housing and Urban-Rural Development on the release of the industry standard "Testing Standards for Building Curtain Wall Engineering"

The "Testing Method Standard for Building Curtain Wall Engineering" is now approved as the industry standard, numbered JGJ / T 324-2014, and will be implemented from October 1, 2014.
This standard is published and distributed by China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
February 28, 2014

Foreword

According to the requirements of the Notice of the Ministry of Construction on the issuance of the "2005 Construction and Standardization Standards and Standards Development and Revision Plan (First Batch)" (Building Standard Letter [2005] No. 84), the standard preparation team has conducted extensive investigations and studies, and has concluded it carefully Based on practical experience, refer to relevant international standards and advanced foreign standards, and prepare this standard on the basis of extensive consultation.
The main technical contents of this standard are: General provisions; 2. Basic regulations; 3. 3. Material, connection and installation quality inspection; Wind pressure resistance; 5. Airtight performance; 6. Watertight performance; 7. Thermal performance; 8. 8. Thermal cycling performance; 10. Sound insulation performance; Optical performance; 11. Impact resistance.
This standard is managed by the Ministry of Housing and Urban-Rural Development, and the China Academy of Building Sciences is responsible for the interpretation of specific technical content. During the implementation process, if you have any comments or suggestions, please send it to the China Academy of Building Research (Address: 30 North Third Ring Road, Beijing, 100013)
Compiling institutes of this standard : China Academy of Building Sciences
Guangxi Construction Engineering Group First Construction Engineering Co., Ltd.
This standard was edited by : Guangdong Academy of Building Sciences
Shanghai Jianke Inspection Co., Ltd.
Fujian Academy of Building Sciences
Shandong Institute of Building Science
National Building Materials Testing Center
Shanghai Building Door and Window Testing Station
Sichuan Academy of Building Sciences
Guangzhou Academy of Building Sciences
Guangdong Jianlang Hardware Products Co., Ltd.
Chengdu Sibao Technology Co., Ltd.
Hangzhou Zhijiang Organic Silicon Chemical Co., Ltd.
Shenzhen Xinshan Curtain Wall Technology Consulting Co., Ltd.
Jiangsu Construction Engineering Quality Inspection Center Co., Ltd.
Zhejiang Construction Science Design & Research Institute Co., Ltd.
Zhengzhou Zhongyuan Applied Technology Research and Development Co., Ltd.
Guangxi Construction Engineering Quality Inspection Center
Beijing Jinyige New Energy Technology Development Co., Ltd.
Guangdong King Kong Curtain Wall Engineering Co., Ltd.
Shanghai Xin Century Curtain Wall Engineering Co., Ltd.
Wanda Business Planning Research Institute Co., Ltd.
Baoye Group Zhejiang Construction Industry Research Institute Co., Ltd.
The main drafters of this standard are Wang Hongtao, Huang Xiaokun, Zhang Shixiang, Liu Huitao, Xu Qin, Zhong Fengsong, Li Guangxu, Liu Yueli, Tan Hua, Luo Tao, Tian Huaqiang, and Liu Haibo. Wan Chenglong Liu Bin
The main reviewers of this standard : Liu Zhongwei, Liao Xuequan, Liu Xinsheng, Wang Shuangjun, Tan Guoxiang, Luo Yi, Chen Jun, Chen Xiangdong, Yin Xiaobo, Ding Yan