北京pk10滚雪球在线计划

Build standard library

People's Republic of China Industry Standards

Inspection Standard for Bond Strength of Facing Bricks in Construction Engineering

Testing standard for adhesive strength of tapestry brick of construction engineering

JGJ / T 110-2017

Approved by: Ministry of Housing and Urban-Rural Development of the People's Republic of China Issued by: Ministry of Housing and Urban-Rural Construction of the People's Republic of China Issued by: May 18, 2017 Implementation date: November 01, 2017

Announcement of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

No. 1558

Announcement of the Ministry of Housing and Urban-Rural Development on the release of the industry standard "Test Standard for Bonding Strength of Facing Bricks for Construction Engineering"

The "Inspection Standard for Bonding Strength of Facing Bricks for Construction Engineering" is now approved as the industry standard, numbered JGJ / T 110-2017, and will be implemented from November 1, 2017. The original "Inspection Standard for Bonding Strength of Facing Bricks for Construction Engineering" JGJ 110-2008 shall be abolished at the same time.
This standard is published and distributed by China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
May 18, 2017

Foreword

According to the requirements of the Ministry of Housing and Urban-Rural Development's Notice on Printing and Distributing the "2015 Construction Standards and Standards Development and Revision Plan" (Jianbiao [2014] No. 189), the compilation team conducted extensive investigations and studies, and carefully summarized its practical experience with reference to relevant International standards and advanced foreign standards, and on the basis of extensive consultation, this standard was revised.
The main technical contents of this standard are: General provisions; 2. Terminology; 3. Basic regulations; 4. Inspection method; 5. Calculation of bond strength; 6. Inspection and evaluation of bond strength.
The main technical content of the revision of this standard is: after a part of the exterior wall facing bricks is pasted on the spot, the adhesive strength inspection of the exterior wall facing bricks can be performed; and the adhesive strength inspection time of the facing bricks is adjusted based on the tile adhesive that complies with the standard.
This standard is managed by the Ministry of Housing and Urban-Rural Development, and the China Academy of Building Sciences is responsible for the interpretation of specific technical content. If you have any comments or suggestions during the implementation, please send them to the China Academy of Building Research (Address: 30 North Third Ring Road East, Beijing, 100013).
Compiling institutes of this standard: China Academy of Building Sciences Beijing Urban Construction Yatai Construction Group Co., Ltd.
Participated in the preparation of this standard: National Construction Engineering Quality Supervision and Inspection Center, Beijing Construction Supervision Association, Zhuhai Construction Engineering Quality Supervision and Inspection Station, Xinjiang Building Science Research Institute Co., Ltd., Tom Energy-saving Building Materials (Beijing) Co., Ltd. Limited company
The main drafters of this standard: Xiong Wei, Dong Jiajie, Zhang Yuanbo, Li Kai, Fei Kai, Huang Chunxiao, Su Yunhui, Zhao Youshan, Wang Licai, Zhao Zhenlin, Yang Xueding
The main reviewers of this standard: Yang Shuxin Wang Zifu Hu Yaolin Xu Hualin Hua Huabin Liao Yong Geng Xiuqin Lu Shen Xu Shan Liu Jiapeng Li Jinyou