北京pk10滚雪球在线计划

Build standard library

People's Republic of China Industry Standards

Thermal environment design standards for urban residential areas

Design standard for thermal environment of urban residential areas

JGJ 286-2013

Compiling department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Approval Department: Ministry of Housing and Urban-Rural Construction of the People's Republic of China Effective date: March 1, 2014

Announcement of the Ministry of Housing and Urban-Rural Development of the People's Republic of China No. 159 Announcement of the Ministry of Housing and Urban-Rural Development on Issuing the Industry Standard "Design Standard for Thermal Environment of Urban Residential Areas"

The Thermal Environment Design Standard for Urban Residential Areas is now approved as the industry standard, numbered JGJ 286-2013, and will be implemented as of March 1, 2014. Among them, Article 4.1.1, 4.2.1 are mandatory provisions and must be strictly implemented.
This standard is published and distributed by China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
September 25, 2013

Foreword

According to the requirements of the former Ministry of Construction's "Notice on Issuing and Establishing the Standards and Specifications for Engineering Construction in 2007" (Jianbiao [2007] No. 125), the standard preparation team has conducted extensive investigations and studies, and carefully summarized practical experience with reference to relevant international Standards and advanced foreign standards, and on the basis of extensive consultation, this standard has been prepared.
The main technical contents of this standard are: General provisions; 2. Terms and symbols; 3. Basic regulations; 4. Prescriptive design; 5. Evaluative design.
The provisions marked in bold in this standard are mandatory and must be strictly implemented.
The Ministry of Housing and Urban-Rural Development is responsible for the management and interpretation of the compulsory provisions of this standard, and the South China University of Technology is responsible for the interpretation of specific technical content. If you have any comments or suggestions during the implementation, please send them to South China University of Technology (Address: South China University of Technology Building Energy Conservation Research Center, 381 Wushan Road, Tianhe District, Guangzhou, 510640).
Compiling institutes of this standard: South China University of Technology
This standard was edited by: Xi'an University of Architecture and Technology
China Construction Southwest Design & Research Institute Co., Ltd.
China Academy of Building Sciences
Guangdong Academy of Building Sciences
Guangzhou Building Research Institute Co., Ltd.
Chongqing University
Huaqiao University
Southwest Jiaotong University
Tsinghua University
Harbin Institute of Technology
China Urban Planning and Design Institute
Shanghai Building Research Institute (Group) Co., Ltd.
Shenzhen Building Research Institute Co., Ltd.
Luoyang Zhongzhi Software Co., Ltd.
Guangzhou Municipal Group Co., Ltd.
Guangzhou Jianji Environmental Digital Brick Co., Ltd.
The main drafters of this standard are: Meng Qinglin, Liu Jiaping, Zhao Lihua, Feng Ya, Yang Liu, Lin Haiyan, Yang Shichao, Ren Jun, Zhang Lei, Zhang Yufeng, Li Qiong, Tang Mingfang, Ran Maoyu, Dong Liang, Lin Porong, Fang Xiumu, Liu Yanfeng, and Zhang Jianrong.
The main reviewers of this standard: Zhao Shihuai, Ge Jian, Zhao Wenkai, Wang Lixiong, Jin Hong, Zhao Honghong, Ruan Yingjun, Tu Yingshi, Li Derong, Xu Jinfeng, Zhou Xiaoqing, Zhu Tao, Wang Jian