北京pk10滚雪球在线计划

Building Standard Library

national standards of People's Republic of China

Code for design of boiler room

Code for design of boiler plant


GB 50041-2008


Compiling department: China Machinery Industry Federation Approving department: Ministry of Construction of the People's Republic of China Date of implementation: August 1, 2008

Announcement No. 803 of the Ministry of Construction of the People's Republic of China

Announcement of the Ministry of Construction on Issuing the National Standard "Code for Design of Boiler Houses"

The "Boiler House Design Code" is now approved as a national standard, numbered GB 50041-2008, and will be implemented as of August 1, 2008. Among them, 3.0.3 (3), 3.0.4, 4.1.3, 4.3.7, 6.1.5, 6.1.7, 6.1.9, 6. 1.14, 7.0.3, 7.0.5, 11.1.1, 13.2.21, 13.3.15, 15.1.1, 15.1.2, 15.1. 3.15.2.2, 15.3.7, 16.1.1, 16.2.1, 16.3.1, 18.2.6, 18.3.12 (paragraphs) are mandatory The provisions must be strictly implemented. The original "Boiler House Design Code" GB 50041-92 was abolished at the same time.
This specification is published by the China Planning Publishing House organized by the Standard Quota Research Institute of the Ministry of Construction.


Ministry of Construction of the People's Republic of China February 3, 2008

Foreword

This specification was completed in accordance with the requirements of the Ministry of Construction No. [2002] No. 85 "Notice on Printing and Distributing the" 2001-2002 National Construction Standard Development and Revision Plan for Engineering Construction ", and was jointly revised by China United Engineering Corporation in conjunction with relevant design and research units. .
During the revision process, after studying the contents of the original code, the revision team focused on energy conservation and environmental protection. In particular, it conducted extensive investigations and studies on the situation where the boiler room was installed in other buildings, and coordinated with relevant departments to solicit extensively. The opinions of relevant units across the country have gone through the stages of soliciting opinions, submitting them for review, and submitting them for approval, and finally, they have been reviewed and finalized by relevant departments.
The revised specification is divided into 18 chapters and an appendix. The main contents of the amendment are:
1. The single rated evaporation capacity of a steam boiler has been expanded from 1 to 65 t / h to 1 to 75 t / h; the single rated thermal power of a hot water boiler has been expanded from 0.7 to 58 MW to 0.7 to 70 MW;
2. For boiler rooms located in other buildings, special requirements for fuel, location selection and layout, fuel and gas systems and pipelines, fire control and automatic control, civil engineering and public facilities, and noise and vibration are specified in this code. strict regulations;
3. Adjusted and strengthened energy conservation and environmental protection provisions;
4. Added "Fire Fighting" chapter and adjusted chapter arrangement.
The provisions in this code marked with bold type are mandatory and must be strictly implemented.
The Ministry of Construction is responsible for the management and interpretation of the mandatory provisions, the China Machinery Industry Federation is responsible for the daily management, and China United Engineering Corporation is responsible for the interpretation of specific technical content.
In order to continuously improve this specification and adapt it to economic and technological development, all units are requested to pay attention to summing up experience and accumulating data during the implementation of this code, and send opinions and relevant information to China United Engineering Corporation (Address: Zhejiang) in a timely manner. No. 338 Shiqiao Road, Hangzhou, Zhejiang Province, 310022, E-mail: zhangzm@chinacuc.com or shihg@chinacuc.com) for reference in future revision.
The organization unit, editor-in-chief unit, participating unit and main drafters of this specification:
Organization unit: China Machinery Industry Survey and Design Association
Compiling institutes : China United Engineering Corporation
Participating organization: China Zhongyuan Xinghua Engineering Company
China New Times International Engineering Corporation
China Machine International Engineering Design & Research Institute
CSSC Ninth Design & Research Institute
Shanghai Mechanical & Electrical Design & Research Institute Co., Ltd.
Beijing Xinyuan Ruipu Technology Development Company
The main drafters: Shi Huaguang Zhang Zengming Shu Shian He Xiaoping Li Lei Dai Yiwen Zhang Quangen Wang Jianzhong Xiong Weirong Ye Quanle Wang Tianlong Zhang Qiuyao Xu Hui Kong Xiangwei Chen Jiliang Mu Jusheng