北京pk10滚雪球在线计划

Build standard library

national standards of People's Republic of China

Code for Construction and Acceptance of Civil Air Defense Engineering

Code for construction and acceptance of civil air defence works

GB 50134-2004

Compiling department: National Civil Air Defense Office Approving department: Ministry of Construction of the People's Republic of China Date of implementation: August 1, 2004

Announcement No. 245 of the Ministry of Construction of the People's Republic of China

Announcement of the Ministry of Construction on issuing the national standard "Code for Construction and Acceptance of Civil Air Defense Engineering"

The "Code for the Construction and Acceptance of Civil Air Defense Engineering" is now approved as a national standard, numbered GB 50134-2004, and implemented as of August 1, 2004. Among them, sections 3.1.2, 3.1.5, 3.3.2, 3.3.3, 3.3.4, 3.3.5, 3.3.6, and 3.3.10 , 3.3.11, 3.3.12, 3.5.1, 6.2.1, 6.2.2, 6.2.5, 6.2.6, 6.3.1, 6 .3.2, 6.3.3, 6.3.4, 6.3.6, 6.3.7, 6.3.8, 6.3.9, 6.3.10, 6.4 .1, 6.4.2, 6.4.5, 6.4.10, 6.4.11, 6.4.12, 6.3.13, 6.4.14, 6.4.16 , 6.5.1, 6.5.2, 9.1.1, 9.1.3, 9.2.1, 9.3.1, 9.3.2, 9.3.3, 9 .4.1, 9.4.3, 9.6.1, 9.6.2, 9.6.3, 9.6.4, 10.1.1, 10.1.2, 10.1 .3, 10.1.4, 10.1.5, 10.1.6, 10.1.7, 10.1.8, 10.1.9, 10.2.1, 10.2.2 , 10.2.3, 10.2.4, 10.2.5, 10.2.6, 10.3.3, 10.3.4, 10.3.5, 10.4.1, 10 .4.2, 10.5.3, 10.5.4, 11.1.1, 11.1.2, 11.1.3, 11.2.1, 11.2.4, 11.2 .5, 11.2.6, 11.2.7, 11.2.8, 11.3.1 11.3.3, 11.3.4, 11.3.5, 11.3.6, 11.4.8, 11.5.5, 11.5.6, 11.5.7, 11. Articles 5.9, 11.5.10, 11.6.1, 11.6.2, 11.6.3, and 11.6.4 are mandatory provisions and must be strictly implemented. The original "Code for Construction and Acceptance of Civil Air Defense Engineering" GBJ 134-90 was abolished at the same time.
This specification is published by the China Planning Publishing House organized by the Standard Quota Research Institute of the Ministry of Construction.


Ministry of Construction of the People's Republic of China June 18, 2004

Foreword

According to the requirements of the National Civil Air Defense Office [2001] National Civil Defense Office No. 51 document, the "Code for Construction and Acceptance of Civil Air Defense Engineering" GBJ 134-90 was revised.
This specification is divided into eleven chapters, and its main contents are: general principles, terminology, tunnel and tunnel excavation, construction in bad geological areas, reverse construction, reinforced concrete construction, pipe jacking construction, shield construction, fabrication of orifice protection facilities and Installation, piping and accessories installation, equipment installation, etc.
The main contents of this revision are:
Added a terminology chapter.
Added a chapter on reverse construction.
Added provisions for shotcrete support in tunnel and tunnel construction.
Added regulations for steel bar fabrication, pumped concrete, and bulk concrete construction.
Adjusted and supplemented the construction requirements of the explosion-proof wave valve, hose valve, explosion-proof overpressure exhaust valve, automatic exhaust valve installation and protection functions during peacetime conversion.
Added the installation contents of ventilator, dehumidifier, muffler and transformer.
Combine equipment installation, anticorrosion, noise reduction, fire prevention of equipment installation engineering, and acceptance of equipment installation engineering into one chapter.
Removed content that is relatively backward in technology, duplicates or inconsistent with relevant standards.
The provisions marked in bold in this code are mandatory and must be strictly enforced.
The Ministry of Construction is responsible for the management and interpretation of the mandatory provisions, and the Liaoning Civil Air Defense Building Design and Research Institute is responsible for the interpretation of specific technical content.
During the implementation of this code, if you need to modify and supplement it, please send your comments and relevant information to the Liaoning Provincial Civil Air Defense Building Design and Research Institute (No. 45-4, Beiling Street, Shenyang 110032) for future revision. reference.
The main editing unit, participating editing unit and main drafter of this standard:
Compiling institutes: Liaoning Civil Air Defense Building Design and Research Institute
Participating organization : Shanghai Underground Architectural Design Institute, Shanghai Civil Air Defense Engineering Management Company, Nanjing Civil Air Defense Office, School of Engineering and Civil Engineering, PLA University of Science and Technology
The main drafters : Zhou Chengyu, Wang Dejia, Chen Chuping, Xu Weilin, Hu Binghong, Li Lijuan, Huang Zhiqiang, Tang Rong, Shen Rui, and Wang Shujun, Wang Yongquan, Sun Zhenglin, Gao Ruiqing, and Kong Lixu.