北京pk10滚雪球在线计划

Build standard library

national standards of People's Republic of China

Architectural decoration engineering quality acceptance standard

Standard for construction quality acceptance of building decoration

GB 50210-2018

Compiling department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Approval Department: Ministry of Housing and Urban-Rural Construction of the People's Republic of China Date of implementation: September 1, 2018

Announcement No. 1834 of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

Announcement of the Ministry of Housing and Urban-Rural Development on the release of the national standard "Quality Acceptance Standards for Building Decoration Engineering"

The “Quality Acceptance Standard for Building Decoration and Decoration Engineering” is now approved as the national standard, with the serial number of GB 50210-2018, which will be implemented from September 1, 2018. Among them, Articles 3.1.4, 6.1.11, 6.1.12, 7.1.12, and 11.1.12 are mandatory provisions and must be strictly implemented. The original "Code for Quality Acceptance of Building Decoration Engineering" GB 50210-2001 was abolished at the same time.
This standard is published on the portal website of the Ministry of Housing, Urban and Rural Construction (www.mohurd.gov.cn), and published by China Construction Industry Press organized by the Standard Quota Research Institute of the Ministry of Housing, Urban and Rural Construction.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
February 8, 2018

Foreword

According to the requirements of the Ministry of Housing and Urban-Rural Development's Notice on Printing and Distributing the "2011 Construction and Standardization of Engineering Construction Standards and Regulations" (Build Standard [2011] No. 17), the standard preparation team has conducted extensive investigations and studies, and carefully summarized its practical experience. Relevant international standards and advanced foreign standards, and on the basis of extensive consultation, revised the "Building Decoration Quality Acceptance Code" GB 50210-2001.
The main technical contents of this standard are: General provisions; 2. Terminology; 3. Basic regulations; 4. 4. Plastering works; 5. Waterproofing for external walls; Door and window engineering; 7. Ceiling works; 8. 9. Light partition wall project; Decorative panel project; 10. 11. Facing brick works; 11. Curtain wall project; Finishing works; 13. 14. Paper and soft package engineering; 14. Detailed engineering; Acceptance of branch project quality.
The main contents of the revision of this standard are: a new chapter on waterproofing works for external walls; a new section for thin plastering works for thermal insulation; a chapter for the original decorative panel (brick) project is divided into two chapters: decorative panel project and decorative brick project ; Divide the ceiling project into overall surface ceiling project, plate surface ceiling project and grille ceiling project; painting project and papering and soft package project added allowable deviations and inspection methods: delete wooden door and window production and radiator cover production and installation Relevant provisions; curtain wall projects list the main control items and general items, and their acceptance content, inspection methods, and inspection quantities are stipulated by each curtain wall technical standard.
The provisions in this standard marked with bold type are mandatory and must be strictly implemented.
The Ministry of Housing and Urban-Rural Development is responsible for the management and interpretation of compulsory provisions, and the China Academy of Building Research Co., Ltd. is responsible for the interpretation of specific technical content. If you have any comments or suggestions during the implementation, please send them to the China Academy of Building Research (Address: 30 North Third Ring Road East, Beijing, 100013).
Compiling institutes of this standard : China Academy of Building Research
This standard was edited by : National Construction Engineering Quality Supervision and Inspection Center
Beijing Construction Supervision Association
China Construction First Bureau (Group) Co., Ltd.
Shenzhen Construction Engineering Quality and Safety Supervision Station
Shenzhen Keyuan Construction Group Co., Ltd.
Suzhou Golden Mantis Building Decoration Co., Ltd.
China Decoration Corporation
Shandong Institute of Building Science
Beijing Xikai Century Building Material Co., Ltd.
The main drafters of this standard : Xiong Weidi, Xiaotan, Gong Wansen, Meng Xiaoping, Zhang Yuanbo, Zhang Renyu, Li Aixin, Yuan Xinping, She Aisen, Wu Junshu, Xin Jianlin, Yin Xiaomei, Zhao Zhenlin, Xie Yuyu
Main reviewers of this standard : Rao Gang, Wu Zhaojun, Zhu Xibin, Zhang Yunlong, Tao Leran, Hu Yaolin, Huo Ruiqin, Huang Yan, Liu Yanshan, Qin Yan, Huang Xiaokun