北京pk10滚雪球在线计划

Build standard library

China Engineering Construction Standardization Association Standard

Technical code for application of building fire blocking

Technical specification for application of fire stopping in buildings

CECS 154: 2003

Compiling institute: Tianjin Fire Research Institute, Ministry of Public Security Approval unit: China Engineering Construction Standardization Association Implementation date: December 1, 2003

Foreword

This regulation was formulated in accordance with the requirements of China Engineering Construction Standardization Association (2001) Jianbiao Xiezi No. 10 "Notice on Printing and Distributing the First Batch of Standardization and Revision Project Plans of the 2001 China Construction Engineering Standardization Association".
Building passive fire prevention measures are derived from the fire experience and lessons, and have been tested in practice, which has played a very good role in preventing the fire from spreading in the building. This regulation stipulates the design and construction of fire-resistant plugging of through-holes, reserved open openings, and building gaps in fire-resistant partition members or between members due to the needs of construction and use of buildings. This regulation is a necessary supplement and complement to the current relevant national standards.
This regulation was formulated on the basis of investigation and research, summing up practical experience, referring to and absorbing the performance and construction methods of related products at home and abroad, and extensively soliciting opinions.
The main contents of this regulation include: General Provisions, Terminology, Fire Prevention and Sealing Throughout, Fire Sealing and Sealing of Building Gap, Construction and Acceptance, a total of 5 chapters.
According to the requirements of the National Planning Commission's Document [1986] No. 1649 "Notice on Inviting China Engineering Construction Standardization Commission to Organize the Pilot Work of Recommended Engineering Construction Standards", the Association's standard "Technical Regulations for the Application of Fire Protection and Blocking in Buildings" is now approved. CECS 154: 2003, recommended for design, construction and use units.
Articles 3.1.1, 3.1.2, 3.1.5, 3.3.5, 3.5.5, 4.1.1, 4.1.3, 4 of this Regulation .1.4, it is recommended to include the "compulsory provisions of engineering construction standards", the rest are recommended provisions.
This regulation is under the centralized management of CECS / TC 21 of the Fire Protection System Committee of the China Engineering Construction Standardization Association. The Tianjin Fire Research Institute of the Ministry of Public Security (No. 92 Weijin South Road, Nankai District, Tianjin, 300381) is responsible for interpretation. If you find that you need to modify and supplement in use, please send comments and information to the explanation unit.
Compiling institutes: Tianjin Fire Research Institute of Ministry of Public Security
Participating units: 3M China Co., Ltd., Hilti (China) Co., Ltd., Shanghai Fire Bureau, Dalian Fire Fighting Team, Shaanxi Provincial Fire Corps, Design Institute of General Administration of Radio, Film and Television, Beijing Post and Telecommunication Design Institute of Ministry of Information Industry, Beijing Architectural Design Institute
Main drafters: Jing Jiansheng, Ni Zhaopeng, Du Xia, Zhang Suxin, Wang Zhi, Li Haifeng, Zhang Juliang, Yuan Guobin, Li Genjing, Ba Run, Zhang Yi, Chen Haiyun, and Sun Dongyuan.

China Engineering Construction Standardization Association
September 25, 2003