北京pk10滚雪球在线计划

Build standard library

People's Republic of China Industry Standards

Technical specification for construction safety of hydraulic sliding formwork

Technical specification for safety of the hydraulic slipform in construction

JGJ 65-2013

Approval department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Date of implementation: January 1, 2014

Announcement No. 61 of the Ministry of Housing and Urban-Rural Development of the People's Republic of China


The "Technical Regulations for the Safety of Hydraulic Sliding Formwork Construction" is now approved as the industry standard, numbered JGJ 65-2013, and will be implemented from January 1, 2014. Among them, Articles 5.0.5 and 12.0.7 are mandatory provisions and must be strictly implemented. The original industry standard hydraulic sliding formwork construction safety technical regulations "JGJ 65-89 was abolished at the same time.
This regulation is published by China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
June 24, 2013


Foreword


According to the requirements of the Ministry of Housing and Urban-Rural Development's "Notice on Printing and Distributing the" 2008 Construction Standards and Standards Development and Revision Plan (First Batch) "(Jianbiao [2008] No. 102), the revision team is conducting in-depth investigation , Summarize practical experience carefully, formulate this procedure on the basis of extensive consultation.
The main contents of this regulation are: General provisions; 2. Terminology; 3. Basic regulations; 4. Construction site; 5. 5. Manufacturing and installation of sliding mode device; 6. Vertical transportation equipment and devices; 7. 8. Power for power and lighting; 8. Communication and signals; 9. 10. Lightning protection; Fire protection; 11. 11. Slipform construction; The sliding form device was removed.
The provisions marked in bold in these regulations are compulsory and must be strictly implemented.
The Ministry of Housing and Urban-Rural Development is responsible for the management and interpretation of the compulsory provisions, and China Metallurgical Construction Research Institute Co., Ltd. is responsible for the interpretation of specific technical content. If you have any comments and suggestions during the implementation, please send them to China Metallurgical Construction Research Institute Co., Ltd. (Address: 33 Xitucheng Road, Haidian District, Beijing, 100088).
Compiling institutes of this code : China Metallurgical Research Institute Co., Ltd.
Jiangsu Jiangdu Construction Group Co., Ltd.
Participating organization : China Formwork Scaffolding Association
China Jingye Engineering Technology Co., Ltd.
Guangzhou Construction Group Co., Ltd.
Jiangsu Lanyue Machinery Co., Ltd.
Yunnan Construction Engineering Fourth Construction Co., Ltd.
China Wuye Group Co., Ltd.
Beijing Construction Engineering Construction Co., Ltd.
Northeast Electricity Administration Smoke Tower Engineering Company
Beijing Aoyu Formwork Co., Ltd.
Qingjian Group Co., Ltd.
Qingdao Xinhuayou Construction Engineering Group Co., Ltd.
The main drafters of this procedure : Peng Xuanchang Wang Jian Zhu Xuefeng Zhao Yajun Zhang Liangjie Mu Hongyuan Xie Qinghua Wu Xiangwei Zhang Zhiming Lu Xiaolin Wang Tianfeng Tang Shirong Liu Xiaoyu Yang Chongjian Zhu Yuanjiang Guo Hongqi Liu Guoen Chu Qin Zhang Zongjian Wang Sheng Zhang Jun
The main reviewers of this regulation : Mao Fenglin, Zhang Liangyu, Zhu Xi, Sun Zongfu, Geng Jieming, Gao Junfeng, Tang Kunlin, Li Junyou, Shi Weidong, Xiao Jian, Xu Yushun