北京pk10滚雪球在线计划

Building Standard Library

People's Republic of China Industry Standards

Heating metering technical regulations

Technical specification for heat metering of district heating system

JGJ 173-2009

Approval department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Effective date: July 1, 2009

Announcement No. 237 of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

Announcement on the release of the industry standard "Technical Regulations for Heating Metering"

The “Technical Regulations for Heating Metering” is now approved as the industry standard, numbered JGJ 173-2009, and will be implemented from July 1, 2009. Among them, Articles 3.0.1, 3.0.2, 4.2.1, 5.2.1, 7.2.1 are mandatory provisions and must be strictly implemented.
This regulation is published by the China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
March 15, 2009

Foreword

According to the requirements of the “Ministry of Construction and Construction Industry Standards Development and Revision Plan for 2004” (Build Standard [2004] No. 66) issued by the former Ministry of Construction, the China Academy of Building Research will be the main editor , Together with relevant units to compile these regulations.
After extensive investigation and research, the compilation team summed up practical experience carefully, made reference to relevant advanced standards at home and abroad, and formulated this procedure on the basis of extensive consultation.
This regulation is divided into 7 chapters. The main technical contents are: general rules, terminology, basic regulations, heat source and heat station heat metering, building heat metering, household heat metering, and indoor heating systems.
The provisions marked in bold in these regulations are compulsory and must be strictly implemented.
The Ministry of Housing and Urban-Rural Development is responsible for the management and interpretation of mandatory provisions, and the China Academy of Building Sciences is responsible for the interpretation of specific technical content.
During the implementation of this procedure, all units are requested to pay attention to summing up experience, accumulate data, and feedback relevant opinions and suggestions to the China Academy of Building Research (Address: 30 North Third Ring Road East, Beijing, 100013) For reference in future revision.
Compiling institutes of this code : Chinese Academy of Building Sciences
Participating organization : Beijing Institute of Architectural Design
Tsinghua University
Harbin Institute of Technology
Shandong Architectural Design & Research Institute
Guizhou Architectural Design & Research Institute
Northwestern Design and Research Institute of China Architecture
Tianjin Architectural Design Institute
Beijing Thermal Power Group Co., Ltd.
Beijing Institute of Metrology and Testing
Beijing Huayi Leye Energy Saving Service Co., Ltd.
Owentop Valve Systems (Beijing) Co., Ltd.
Beijing Jinfang HVAC Energy Saving Technology Co., Ltd.
Danfoss (Shanghai) Automatic Control Co., Ltd.
German Fetra Company Beijing Representative Office
Emma Trading (Shanghai) Co., Ltd.
Beijing Zhongli Debang Intelligent Electromechanical Technology Co., Ltd.
Denmark Benata Corporation Tianjin Office
Langier Instrument System (Zhuhai) Co., Ltd.
London Liyang United Limited
German Texim Energy Services (Dalian) Co., Ltd.
The main drafters of this regulation : Xu Wei, Zou Yu, Huang Wei, Cao Yue, Di Hongfa, Fang Xiumu, Yu Xiaoming, Sun Yanxun, Song Bo, Lu Yaoqing, Wu Xiaoting, Dong Chongcheng, Yu Yinghe, Chen Ming, Zhang Liqian, Ma Xuedong, Ding Qi, Li Xiaopeng, Wang Zhaoli, Feng Tieshu, Yu Guangpi, Lin Xiaojun, Li Baojun, Zhou Pinhuan, Li Yingjian
The main reviewers of this procedure : Wu Desheng, Xu Wenfalang, Four Dimensions, Chen Yiliang, Wen Li, Jin Lina, Liu Weiliang, Li Deying, Gao Mingliang