北京pk10滚雪球在线计划

Build standard library

People's Republic of China Industry Standards

Code for construction and acceptance of urban road lighting projects

Specification for construction and inspection of urban road lighting engineering

CJJ 89-2012

Approval department: Ministry of Housing and Urban-Rural Development of the People's Republic of China Issue Department: Ministry of Housing and Urban-Rural Construction of the People's Republic of China Issue Date: May 16, 2012 Effective Date: November 1, 2012

Announcement of the Ministry of Housing and Urban-Rural Development of the People's Republic of China

No. 1379

Announcement on the release of the industry standard "Code for Construction and Acceptance of Urban Road Lighting Engineering"


The Code for Construction and Acceptance of Urban Road Lighting Projects is now approved as the industry standard, numbered CJJ 89-2012, and will be implemented from November 1, 2012. Among them, sections 4.3.2, 5.2.4, 5.3.3, 6.1.2, 6.2.3, 6.2.1, 7.1.1, 7.1.2 , 7.2.2, 7.3.2, 7.3.3, 8.4.7 are mandatory provisions and must be strictly implemented. The original industry standard "CJJ 89-2001 Regulations for Construction and Acceptance of Urban Road Lighting Projects" was repealed at the same time.
This regulation is published by China Construction Industry Press organized by the Standard Quota Research Institute of our Ministry.

Ministry of Housing and Urban-Rural Development of the People's Republic of China
May 16, 2012

Foreword


In accordance with the requirements of the Ministry of Housing and Urban-Rural Development's "Notice on Printing and Distributing the" 2010 Construction and Construction Standards Development and Revision Plan "(Jianbiao [2010] No. 43), the formulating team has conducted extensive investigations and studies, carefully summarized practical experience, and referred to relevant International Standards and foreign advanced standards, and on the basis of extensive consultation, amend this Regulation.
The main technical contents of this regulation are: 1. General provisions; 2. Terminology; 3. 3. Transformers and box-type substations; 4. Power distribution device and control; 5. Overhead lines; 6. Cable lines; 7. Security protection; 8. Street light installation etc.
The main technical content of the revision of this regulation is: appropriately improving the quality standards for the installation and construction of urban road lighting equipment, adding box-type substations, underground substations, overhead cables, intelligent monitoring systems, LED street lights, elevated roads and bridge street lights, etc. content.
The provisions marked in bold in these regulations are compulsory and must be strictly implemented.
The Ministry of Housing and Urban-Rural Development is responsible for the management and interpretation of the compulsory provisions, and the Beijing Municipal Lighting Management Center is responsible for the interpretation of specific technical content. If you have any comments or suggestions during the implementation, please send them to Beijing Urban Lighting Management Center (Address: 2 Fangzhuang Road, Fengtai District, Beijing, 100078).
Compiling institutes of this code: Beijing Urban Lighting Management Center China Municipal Engineering Association Urban Road Lighting Professional Committee
Participated in this regulation: Wuhan Street Light Administration Bureau, Shenyang Street Light Administration Bureau, Shenzhen Lighting Environment Management Center, Changzhou Urban Lighting Management Office
The main drafters of this regulation: Sun Yi, Yan Bing, Zhang Huaji, Zhong Yi, Mao Yuansen, Zhu Xiaodi, Li Zhenjiang, Wu Chunhai, Li Ruiji
The main reviewers of this regulation: Li Tienan, Sun Weiping, Chen Guangming, Ye Feng, Huang Haibo, Ding Rong, Chen Qisan, Qiao Chenguang, Wang Xiaoming, Zhou Zhihua, Li Dachao